Item # bci3025988
The Miseno MSS3018SR/MK500-SS has been discontinued
** See similar or replacement items below **
Miseno 30" Single Bowl Stainless Steel 16 Gauge Kitchen Sink with Pre-Rinse Style Kitchen Faucet
Model: MSS3018SR/MK500-SS
Discontinued
Product Overview
This product has additional required/recommended options. To configure, add to your cart.
- Garbage Disposal Recommended
Combo Includes:
- MK500 Kitchen/Prep Faucet
- MSS3018SR 16-Gauge Stainless Steel Kitchen/Prep Sink
- Matching Drain Assembly and Basin Rack
Sink Features:
- 16-Gauge T-304 stainless steel - Miseno sinks are constructed of 16-gauge, T-304 stainless steel. This is the same thickness and quality used in commercial kitchens, and is guaranteed not to chip, crack or blemish.
- Extra deep basins - The extra deep basins provided with a Miseno sink (up to 10 inches) have plenty of room for washing large pots and pans, or even the family pets.
- Lifetime warranty - This Miseno sink is covered under a limited lifetime structural warranty. Should this sink not meet the highest quality standards we expect, you're covered for life.
- Satin finish - Miseno stainless steel is finished to a fine satin luster that will keep your sink looking as good as the day you bought it. Fingerprints and water spots stay invisible, which makes cleanup a snap.
- Sound dampening - Cheap stainless sinks have one annoyance, they like to ring when bumped. A lot. Miseno sinks use a combination of rubber pads and sound absorbent acrylic undercoating that makes for a very quiet dishwashing experience.
- Small radius corners - This Miseno sink is manufactured with small-radius corners, giving it a modern-style appearance. The tight corners create a nearly-flat basin bottom, that adds to its simple elegance.
- A rear drain location improves storage options by locating the drain plumbing further back in the cabinet
- Stainless steel construction lends to a certain flexibility - sink won't crack or chip and dishes stay intact when dropped into basin
Faucet Features:
- Solid brass construction - In the faucet world, there's no substitute for brass. This Miseno faucet features solid brass construction in the faucet body and handle, which will resist corrosion for years to come.
- Pre-Rinse swivel spout - The pre-rinse design is the hot new trend, due to it's durability and flexibility. Popularized in commercial kitchens, this practical faucet looks high-tech and will give years of outstanding performance.
- Stainless steel hose - Many manufacturers like to skimp on hoses for their pre-rinse faucets, and use materials like nylon, but nothing has the durability and longevity of steel. A finish-matched stainless hose is standard on our pre-rinse faucets.
- Lifetime warranty - Miseno bar faucets are covered by a limited lifetime warranty on both finish and function. Our finishes resist tarnishing, and our faucets are engineered to rival the biggest names in the industry.
- Multi-Flow - Choose between a standard aerated flow pattern, or a powerful rinsing spray that will help remove the toughest food residue.
- ADA Compliant - This faucet has been designed for ADA compliance, and is suitable for use by the handicapped or those with motor-reflex issues.
- Miseno's finishes are engineered to resist corrosion and tarnishing
- Smooth single handle operation (handle included)
- All brass support bar - holds faucet head in place when not pulled out
Sink Specifications:
- Installation Type: Undermount (sink is mounted via included steel clips which affix to the underside of the counter)
- Number of Bowls: 1 (maximizes usable workspace in the sink)
- Sink Height: 10" (measured from bottom most to top most point on sink)
- Overall Length: 30" (measured from the left outer rim to the right outer rim)
- Overall Width: 18" (measured from the back outer rim to the front outer rim)
- Basin Length: 28" (measured from the left inner rim to the right inner rim)
- Basin Width: 16" (measured from the back inner rim to the front inner rim)
- Basin Depth: 10" (measured from the center of basin to the rim)
- Cabinet Space Required: 33" (accounts for the undermount lip and clips needed for install)
- Drain Opening: 3-1/2" (standard opening size for nearly all garbage disposal including InSinkErator)
Faucet Specifications:
- Overall Height: 21" (measured from the mounting surface to highest part of faucet)
- Spout Height: 8-1/4" (measured from mounting surface to spout outlet)
- Spout Reach: 7-7/8" (measured from center of faucet body to center of spout outlet)
- Faucet Holes: Single Hole (number of holes required for faucet installation)
- Flow Rate: 1.8 gallons-per-minute
- Max Deck Thickness: 2-1/2" (cannot mount to thicker decks without use of extension kit)
- 20" Braided stainless steel supply lines included
- Designed to easily connect to standard U.S. (3/8") plumbing supply bibs
Additional Miseno Links
This product is listed under the following manufacturer number(s):
- Miseno MSS3018SR/MK500-SS*
Stainless Steel Faucet
*Denotes a finish or option that has been discontinued.
Manufacturer Resources
Dimensions and Measurements
Basin Depth
10 in.
Basin Length
28 in.
Basin Width
16 in.
Depth
10 in.
Drain Connection
3.5 in.
Escutcheon Width
10.125 in.
Faucet Centers
0 in.
Faucet Height
21 in.
Flow Rate (GPM)
1.8
Gauge
16
Length
30 in.
Max Deck Thickness
2.5 in.
Minimum Cabinet Size
33 in.
Nominal Length
30 in.
Sink Height
10 in.
Sink Length
30 in.
Sink Width
18 in.
Spout Height
8.25 in.
Spout Reach
7.875 in.
Spout Swivel
360 Degrees
Water Connection
1/2"
Width
18 in.
Included Components
Basin Rack Included
Yes
Basket Strainer Included
Yes
Colander Included
No
Cutting Board Included
No
Escutcheon Included
yes
Faucet Included
Yes
Filtering
No
Handles Included
yes
Installation Hardware Included
Yes
Sidespray
No
Soap Dispenser Included
No
Vacuum Breaker
No
Valve Included
Yes
Characteristics and Features
Apron Front
No
Basin Split
Single Basin
Drain Placement
Rear
Electronic
No
Farmhouse
No
Faucet Holes
1, 0
Faucet Installation Type
Deck Mounted
Faucet Material
Brass
Faucet Mounting Type
Single Hole
Faucet Type
Kitchen Faucet
Handle Material
Brass
Handle Style
Lever
Installation Type
Undermount
Material
Stainless Steel
Number Of Basins
1
Number Of Handles
1
Overflow
No
Pre Rinse
Yes
Pullout Spray
No
Sink Material
Stainless Steel
Sink Shape
Rectangular
Sound Dampening
Yes
Spout Type
Swivel
Stainless Steel Grade
304
Theme
Industrial, Modern
Touch Faucet
No
Touchless Faucet
No
Valve Type
Ceramic Disc
Warranty and Product Information
ADA
No
CA Drought Compliant
Yes
Certifications
CSA, UPC, ASME
Eco Friendly
Yes
Low Lead Compliant
Yes
Manufacturer Warranty
Limited Lifetime
WaterSense Certified
No
Send to a Friend