PROFLO BUILDER'S PACK - QUANTITY 50 - 25" Single Basin Stainless Steel Kitchen Sink with 4 Holes Drilled

Product Features:

• THIS IS A PACKAGE OF 50 SINKS - BUY IN BULK TO SAVE!
• Constructed of 23-gauge T304 stainless steel - highly corrosion and rust resistant
• Fully covered under Proflo's 2-year kitchen sink warranty
• Single bowl design - provides maximum usable workspace
• Drop-in installation - sink is placed in pre-cut hole and adheres to top of counter
• Drain is located in the center of the basin
• Sound absorption pads and coating applied - minimizing sound and vibration from sink
• Capable of ADA compliant installation
• Standard 3-1/2" drain opening makes sink compatible with most garbage disposals - including Insinkerator

The Proflo Advantage:

• T304 Stainless Steel Construction: A stainless steel blend that incorporates chromium and nickel components that fortify the durability of the fixture, and act as a neutralizer for corrosive agents that often end up in the sink. This is the best steel on the kitchen sinks market, and is sure to make your sink last a lifetime.
• Sound Absorption Technology: State of the art sound absorbing pads are applied to the underside of the sink and then coated with an additional layer of absorption material. This reduces sounds and vibrations from water and dishes impacting the sink, this is not only nice on the ears, but adds another level of durability to the sink.

Product Specifications:

• Overall Height: 7-5/8" (measured from the bottom of sinks underside to the top of the mounting lip)
• Overall Length: 25" (measured from the left outer rim to the right outer rim)
• Overall Width: 22" (measured from the back outer rim to the front outer rim)
• Basin Length: 21" (measured from left inner rim to the right inner rim)
• Basin Width: 15-3/4" (measured from the back inner rim to the front inner rim)
• Basin Depth: 6" (measured from center of basin floor to the rim)
• Minimum Cabinet Size: 30" (recommended space needed for sink installation)
• 4 pre-drilled faucet holes (8" centers)
• Sink complies with ASME A112.19.3-2008 / CSA B45.4-08