Chicago Faucets Wall Mounted Utility Faucet with Lever Handles and 18" Swing Spout - Commercial Grade

Product Features:

• Manufactured and assembled in the United States of America
• Faucet body and handles are covered under Chicago Faucet’s limited lifetime warranty
• Constructed of solid brass
• High quality chrome plated finish – finishes are covered under warranty for a year
• Double handle operation - handles rest on 1/4" turn valve seats
• Ceramic 1/4" turn operating cartridge - covered under warranty for 5 years
• Spout swivels 360-degrees to allow for unobstructed access to the whole sink
• Wall mount installation saves valuable counter space
• 17-3/4" Swinging spout provides maximum maneuverability
• ADA compliant
• Low lead compliant - meeting federal and state regulations for lead content
• Mounting hardware not included

The Chicago Faucets Benefit

• Commercial Grade Faucet: When a product is marked as "commercial grade" it means it has been built specifically to stand the test of time, and has been factory tested to function flawlessly through constant and continuous use. It is expected that faucets used in a commerce fashion will see much more use, and inversely abuse than typical faucets you might see in a residential setting, so they are engineered to do just that. Using simple, yet reliable, designs coupled with the industry's highest quality materials these faucets are some of the most reliable on the market. Although they are marketed as being ideal for commercial settings, the savvy home owner might take the quality found here and add a staple of functionality throughout the home as well.

• ECAST Construction: With the threat of lead pollution in the public’s supply of drinking water, Chicago Faucets was one of the industry’s first to take the lead in finding a solution. These faucets are made of the same durable, high quality materials and fittings as always, however they are manufactured with .25% or less total lead content by weighted average. This means their faucets not only meet the strict guidelines first introduced by states like California and Virginia, but it surpasses those standards, coming as close to truly lead-free as possible.

Product Specifications:

• Spout Reach: 17-3/4" (measured from center of faucet body to cneter of spout outlet)
• Required Installation Holes: 2
• Faucet Centers: 3"-8" (center-to-center distance between installation holes)
• Flow Rate: 2.2 gallons-per-minute
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140 degrees Fahrenheit
• 2-3/8" Lever handles included with faucet

Codes and Compliances:

• ASME A112.18.1/CSA B125.1
• Certified to NSF/ANSI 61, Section 9 by CSA
• ADA ANSI/ICC A117.1

About Chicago Faucets:

Chicago Faucets, a member of the Geberit Group, has been a company that the nation has relied on for over a century to craft the highest quality and reliable plumbing products. They offer a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sporting facilities. It is one of the only manufacturers left today that can say they engineer and assemble their faucets in the United States of America. Through constant innovation, such as the patented ECAST material and Quaturn cartridges, Chicago Faucets has not only stayed at the top of the industry, but has revolutionized it in many ways. With a focus in commercial grade faucets they truly exemplify durability and dependability in every one of their products.