Item # bci2227084
American Standard Cadet 3 Round-Front Two-Piece Corner Toilet with Right Height Technology - Left Mounted Tank Lever
Model: 270BD001.020
from the Cadet 3 Collection
$385.35
Finish: Choose Finish
- Bone$493.89Special Order
- Linen$458.04Special Order
- White$385.35Special Order
Free Shipping on LTL freight orders over $1,499.00!
Leaves the Warehouse in 17 to 21 weeks
Product Overview
This product has additional required/recommended options. To configure, add to your cart.
- Toilet Seat Required
American Standard 270BD001 Features:
- Replacement to 2844.016 (Specs/dimensions are the same)
- Fully covered under a 5 year warranty - 5 times the industry standard
- Quick, quiet flushing - American Standard toilets are famously efficient and hushed
- Industry-leading flushing system out-performs older toilets while using less than 1/2 the water
- Tank flushing components specially engineered to withstand chemically-treated urban water
- Sanitary bar on bowl prevents liquids from traveling under the tank
- Round bowl shape - space saving and more economical than elongated bowls
- Two-piece toilet - less cumbersome than one-piece designs to lift, carry, and install
- Chair-height bowl - easier to sit and stand; appropriate for adults and the elderly
- Left mounted trip lever
- Perfected porcelain casting process and adjustable tank anchors eliminate "tank wobbles"
- Straight-forward installation instructions are included with each toilet
- 100% factory flush tested - guaranteed to perform
- Toilet seat is not included - when adding to cart, options that fit this toilet will be presented
- Wax ring kit (for installation) is not included - when adding to cart, this inexpensive item will be presented
Cadet 3 Flushing:
- 3” Flush Valve – The flush starts with a flushing system that employs a 3” valve opening, allowing water to enter the bowl at a much faster rate than the industry standard 2” flush valve. Controlled by a flapper that is engineered to be chemical-resistant, the Cadet flushing valve system is highly regarded for its durability.
- 360 Degree Cleaning – Water entering the bowl does so in a sweeping 360-degree motion. This is designed to help completely clear the bowl, even while using less water.
- Powerful Siphoning Water Jet – A perfectly positioned water jet captures the circular flow of water for optimal performance with minimal energy loss (water doesn’t hit a flat spot and slow down). As waste and water exit, they are siphoned into the trapway for an unmatched push/pull one-two punch.
- 2-1/8” Fully Glazed Trapway – Waste and water exit the toilet through a trapway that is fully glazed, which seals it and provides for a smooth surface that waste can in no way cling to. The 2-1/8” diameter chute, while slightly narrower than the American Standard Champion flushing system’s 2-3/8” trapway, can still flush up to 150 feet of toilet paper without clogging. Not that you’ll ever use that much.
Other Technologies / Benefits:
- Right Height – Right Height bowls lift the sitting-height an additional 1.5 inches off the ground for a more comfortable seated position that is easier to get in and out of. This feature is particularly well liked by men, taller women, and the elderly.
American Standard 270BD001 Specifications:
- Overall Height: 31-1/2" (bottom of the base to the highest point on the toilet)
- Overall Length: 32" (back of the tank to the front of the rim)
- Overall Width: 19-1/4" (furthest point on the left to the furthest on the right)
- Bowl Height: 16-1/8" (bottom of the base to the rim)
- Rough In: 12" (wall behind toilet to center of waste outlet hole in floor)
- Flush Valve Size: 3" (diameter of the inlet for water entering bowl from tank)
- Trapway Size: 2-1/8" (diameter of the outlet for water/waste exiting the bowl)
- Flow Rate: 1.6 GPF (gallons-per-flush)
- Water Depth (From Rim): 6-1/8"
- Tank Trip Lever Placement: Left
Variations:
- 270BD001 - This model
- 270AD001 - Elongated bowl version of this model
Why Buy American Standard From Us:
- We are an American Standard Preferred Authorized Online Dealer
- We Only Ship Showroom Quality products vs Builder Grade quality found at big box retailers
- All metal parts, not plastic like some of our competitors
- Customer Care Experts Available 7 Days a Week to Serve You Before & After Purchase
- A Showroom Experience from the Comfort of Your Home or Office
Additional American Standard Links
This product is listed under the following manufacturer number(s):
Manufacturer Resources
Dimensions and Measurements
Bowl Height
16.125 in.
Depth
32 in.
Flush Valve Size
3 in.
Gallons Per Flush
1.6
Height
31.5 in.
Product Weight
100 lbs.
Rough In
12 in.
Trapway
2.125 in.
Width
19.25 in.
Included Components
Seat Included
No
Characteristics and Features
Bowl Shape
Round
Configuration
Two Piece
Flush Type
Siphon Jet
Installation Type
Floor Mounted, Corner
Material
Vitreous China
Trip Lever Placement
Left
Manufacturer Technology
Flush Technology
Cadet
Warranty and Product Information
ADA
Yes
CA Drought Compliant
No
Collection
Cadet 3
Series
Cadet
TX Drought Compliant
No
WaterSense Certified
Yes
Product Videos
How to remove and install a Toilet
If you have been considering replacing your toilet, yet are wonde...
Send to a Friend