Item # bci2547656
The Kraus KBU24-KPF-2230CH has been discontinued
** See similar or replacement items below **
Kraus Kitchen Combo - 32" Undermount Double Basin 16-Gauge Stainless Steel Kitchen Sink with Pullout Kitchen Faucet
Model: KBU24-KPF-2230CH
Discontinued
Product Overview
What's Included in This Combo:
- 16-gauge stainless steel sink
- Pullout spray kitchen faucet
- Dish grids (basin racks)
- Basket strainers (sink drains)
- Mounting and installation brackets
- Sink cutout template (for countertop cut dimensions)
- Dish towel with Kraus logo
- Specification / installation sheet
Sink Features:
- Fully covered under Kraus' limited lifetime warranty
- Constructed of 16-gauge premium grade T-304 stainless steel - guaranteed to never rust or corrode
- Commercial grade satin finish - highly scratch and stain resistant
- Padded, Stone-Guard undercoat applied over rubber pads to reduce sink noise while in use
- Double bowl (55/45 split) 32" sink with traditional rounded corners
- Extra deep (9" depth) design is perfect for the semi-professional kitchen
- Undermount installation; fits 33"+ cabinets
- Standard 3-1/2" drain opening compatible with most garbage disposal units
Faucet Features:
- Fully covered under Kraus' limited lifetime warranty
- Faucet body and handle constructed of solid brass
- Insulated pullout spray faucet head with 28" hose
- Spout swivels 360° to allow for unobstructed sink access
- Two Settings: Spray and stream
- High-arch gooseneck spout further allows for unobstructed sink access
Sink Specifications:
- Overall Height: 9" (measured from the bottom of sink to the top of the rim)
- Overall Width: 20-5/8" (measured from the back outer rim to the front outer rim)
- Overall Length: 32" (measured from the left outer rim to the right outer rim)
- Basin Width (Left): 18-5/8" (measured from the back inner rim to the front inner rim)
- Basin Width (Right): 16-1/2" (measured from the back inner rim to the front inner rim)
- Basin Length (Left): 15-3/4" (measured from the left inner rim to the right inner rim)
- Basin Length (Right): 16-1/2" (measured from the left inner rim to the right inner rim)
- Basin Depth (Left): 9" (measured from the center of basin to the rim)
- Basin Depth (Right): 7-1/16" (measured from the center of basin to the rim)
- Installation Type: Undermount
- Drain Outlet Connection: 3-1/2"
- Minimum Base Cabinet Width: 33"
Faucet Specifications:
- Overall Height: 14-1/2" (measured from counter top to highest point of faucet)
- Spout Height: 8" (measured from counter top to faucet outlet)
- Spout Reach: 9-3/10" (measured from center of faucet base to center of faucet outlet)
- Number of Installation Holes Required: 1
- Flow Rate: 2.2 gallons-per-minute
- Single handle included
- ADA compliant
- Low lead compliant - complies with federal and state regulations for lead content
- Designed to easily connect to standard U.S. plumbing supply bibs
- Extra secure mounting assembly
- All necessary mounting hardware included
Sink Technologies / Benefits:
- Extra Thick, 16 Gauge Stainless Steel: Short of paying thousands of dollars, 16 gauge is as thick as sinks come (22% thicker than 18 gauge; 36% thicker than 20 gauge). Thicker steel means a stronger sink (hence the lifetime warranty) while also offering a richer and more robust appearance to the finish that is easily discernible from the white-washed, cheap look of thinner sinks.
- Premium Grade T-304 Stainless Steel: There are two primary types of stainless steel in the market: T-409 and the higher quality T-304. The difference lies in chromium and nickel contents; T-409 with 11% and .5% respectively, T-304 with 18% and 10%. When added to steel, these two metals prevent oxidation and rust by neutralizing sodium chloride (salt) – a common element in everyday kitchens. While cheaper sinks use T-409, Kraus sinks boast T-304, further lending to the lifetime warranty.
- Sound Insulated: Sound insulated steel is commonly only thought of in the automobile industry. There, auto manufacturers use spray-on "Stone Guard" insulation to provide for a quieter ride and protect the steel. Borrowing this technology and adding to it, Kraus sinks use Stone Guard insulation, sprayed over rubber sound dampening pads to create a noticeably lower-tone and overall quieter kitchen sink. It also protects your cabinet from underside condensation drips.
- Included Dish Grid (Basin Rack) and Basket Strainer (Drain): It's a wonder why dish grids aren't included with all sinks; they serve a valuable role. Not only do they virtually eliminate scratches, they allow the sink to properly drain, preventing sink scum and protecting your cutlery. As with most Kraus kitchen sinks, this sink includes the stainless steel sink grid along with the stainless steel basket strainer you'll need for installation.
Faucet Technologies / Benefits:
- Precision Kerox Cartridges: The cartridge's job is to deliver smooth handle operation and water flow, throughout hundreds of thousands of uses, without ever leaking – all while under a punishing 60 pounds-per-square-inch of pressure. For these reasons, it is quite literally what "makes or breaks" the faucet. Kraus understands this, so they take no shortcuts here, importing their cartridges from the world's leading manufacturer of high-end precision ceramic disc cartridges, Kerox in Hungary.
- Swiss-Made NeoPerl Aerators: Aerators are possibly the most under-appreciated component within faucets. Not only do they soften the stream (preventing splashing), but they also control the straightness, diameter, overall delivery of water. Fortunately, like their cartridges, Kraus recognizes this and chooses to takes no gambles here – they import their aerators from NeoPerl in Switzerland, the world's leading manufacturer for high-end and specialty aerators.
Additional Kraus Links
This product is listed under the following manufacturer number(s):
- Kraus KBU24-KPF-2230CH*
Stainless Steel / Chrome - Kraus KBU24-KPF-2230ORB*
Stainless Steel / Oil Rubbed Bronze - Kraus KBU24-KPF-2230SN*
Stainless Steel / Satin Nickel
*Denotes a finish or option that has been discontinued.
Manufacturer Resources
Dimensions and Measurements
Basin Depth
9, 7.063 in.
Basin Depth (Left)
9 in.
Basin Depth (Right)
7.063 in.
Basin Length (Left)
15.75 in.
Basin Length (Right)
13 in.
Basin Width (Left)
18.625 in.
Basin Width (Right)
16.5 in.
Drain Connection
3.5 in.
Faucet Centers
0 in.
Faucet Hole Size
1.25 in.
Flow Rate (GPM)
1.8
Gauge
16
Handle Height
3 in.
Hose Length
59 in.
Length
32 in.
Max Deck Thickness
1.75 in.
Minimum Cabinet Size
33 in.
Nominal Length
32 in.
Sink Height
9 in.
Sink Length
32 in.
Sink Width
20.625 in.
Spout Height
8 in.
Spout Reach
9.3 in.
Spout Swivel
360 Degrees
Width
20.625 in.
Included Components
Basin Rack Included
Yes
Basket Strainer Included
Yes
Colander Included
No
Cutting Board Included
No
Drain Assembly Included
Yes
Escutcheon Included
Yes
Faucet Included
Yes
Handles Included
Yes
Installation Hardware Included
Yes
Sidespray
No
Sink Included
Yes
Soap Dispenser Included
No
Valve Included
Yes
Characteristics and Features
Basin Split
55/45
Drain Placement
Rear
Farmhouse
No
Faucet Holes
1
Faucet Material
Brass
Faucet Type
Kitchen Faucet
Handle Material
Brass
Handle Style
Lever
Installation Type
Undermount
Material
Stainless Steel
Number Of Basins
2
Number Of Handles
1
Pre Rinse
No
Pullout Spray
Yes
Sink Material
Stainless Steel
Sink Shape
Rectangular
Sound Dampening
Yes
Spout Type
Swivel
Stainless Steel Grade
304
Theme
Modern
Valve Type
Ceramic Disc
Warranty and Product Information
ADA
No
Approved for Commercial Use
No
CA Drought Compliant
Yes
Faucet Manufacturer
Kraus
Faucet Model
KPF-2230
Low Lead Compliant
Yes
Manufacturer Warranty
Limited Lifetime
Sink Manufacturer
Kraus
Sink Model
KBU24
Send to a Friend