Elkay Single Basin Refrigerated Wall Mount Water Cooler with Prepped Glass Filler

Elkay Single Basin Refrigerated Wall Mount Water Cooler with Prepped Glass Filler

Elkay is sure to have a water cooler or drinking fountain that will meet or exceed your specifications.

Product Features:

• Self-contained wall hung water cooler
• Electric refrigerated
• Capacity of 50°F drinking water, based upon 80°F inlet water and 90°F ambient
• Valve with built-in flow regulator to provide constant stream from 20 to 105 psi water pressure
• Non-pressurized Stainless steel cooling tank system is standard
• Non-pressurized water tank is located after bubbler valve (so that tank is subject to line pressure only when valve button is pressed)
• ADA compliant
• No lead design
• Construction
  • Frame - Galvanized structural steel chassis supports refrigeration system and fastens to wall. Provides increased structural integrity and rigidity to cooler
  • Stainless steel Basin - One piece basin has integral drain grid, embossed bubbler pad. No exposed fasteners
  • Exclusive Flexi-Guard Safety Bubbler - Innovative design utilizes a pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position
  • Upper Shroud - Contoured shock-absorbing, provides additional protection against accidental injury. No exposed fasteners
  • Lower Shroud - One piece easy to remove and replace. Allows access to internal components from three sides
  • Wall mounting Frame - MF200 frame furnished with each unit. Frame allows flush mounting to finished wall
• Cooling System
  • Motor Compressor - Hermetically sealed, reciprocating type, single phase. Sealed in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug
  • Condenser - Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated
  • Cooling Unit - Combination tube-tank type. Tube portion is continuous coil of copper tubing. Fully insulated with EPS foam (UL listed for self-extinguishing material)
  • Refrigerant Control - Refrigerant type HFC-134a is controlled by accurately calibrated capillary tube for positively trouble free performance
  • Temperature Control - Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements

Product Specifications:

• Base Flow Rated: 8.0
• Rated Watts: 370
• Full Load Amps: 4.0
• Fountain Type: Cooler
• Shipping Weight: 56 lbs
• Installation Type: Wall
• Hands Free Operation: No
• Voltage: 115V/60Hz
• Height: 18-13/16"
• Width: 18-3/8"
• Depth: 19"
• Foot Pedal: No
• Glass Filler: Yes
• Filtered: No