This product has additional required/recommended options. To configure, add to your cart.
*Important* We recommend the K-304-K or K-304-KS for standard Residential 1/2" Connection Installation.
The new K-2971-KS supersedes the K-306-KS valve and features a redesigned pressure balance module to provide superior resistance to mineral deposits and aggressive water conditions combined with simplified installation and maintenance. The new valve utilizes existing K-306-KS valve trim and is dimensionally identical for simplified conversion to the new design.
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
Yes, you can reverse the cartridge forhe Kohler K-2971-KS by flipping the mixing cap 180 degrees. If you have any other questions please call 800-375-3403 x725 for Jordan. Thank you.
The Kohler K-2971-KS does have integral stops. Kohler refers to them as screw driver stops. Allows you to turn off the water at your valve versus the whole home if a leak were to develop.
The Kohler K-2971-KS is a pressure balance valve. It sounds like you are looking for a thermostatic valve? What type of system are you trying to run?
The Kohler K-2971-KS is capable of putting out 13 GPM.
No, from inlet to inlet the Kohler K-2971-KS is 8 inches.
The Kohler K-2971-KS is intended to be installed behind a shower control trim, which can be used with a shower or shower/bath combo, all it does is control water temperature and flow, what sort of spout it goes through is up to you. Please let me know if you have any further questions.
The Kohler K-2971-KS is intended for use with a shower or shower/bath combo. It does not have a diverter if you are trying to divert the water to a handshower or bodysprays. You are going to need an actual diverter valve such as the K-728-K.
This valve is standard for all of Kohlers single handle trim. To make it easier on our site you can go through and find a trim you like when you add it to the cart it will recommend the valves that can be used.
The Kohler K-2971-KS replaces the K-306-KS and are valves for 3/4" pipes. The K-304-K and K-304-KS are still available and are valves for 1/2" pipe.
The Kohler K-2971-KS is a valve that is determined by the trim piece you are using. As far as replacing the tub spout or showerhead the valve does not matter. But if you are looking to replace your trim piece and wanting to use the exhisting valve then you will want to make sure the valve is compatible with the trim piece you are replacing. Hope this answered your question but if not let me know. I would be happy to help.
Kohler's transfer valve is model Kohler K-728-K.
| Category | Shower Valves |
|---|---|
| Sub Category | Pressure Balance Valves |
| Made in America | Yes |
| Country Of Origin | USA |
Like many retailers, FaucetDirect.com can choose to set its own prices independently. And even though manufacturers require FaucetDirect.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at FaucetDirect.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
FaucetDirect.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. FaucetDirect.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
FaucetDirect.com is a
Build.com, Inc Network Store
