InSinkErator SST-FLTR Point-Of-Use Water Heater

Item #: BCI374021

Offer Ends
We still have product details and accessories, scroll down to see them!

Product Details for the InSinkErator SST-FLTR

Point-Of-Use Water Hot Water Tank

Designed for InSinkErator Instant Hot Water Dispenser faucets*, this revolutionary new tank has been engineered for durability, convenience and peace of mind. With a generous 2/3-gallon capacity, it provides 35% more near-boiling 200 degree F water than our previous model.

With its patented top mounted expansion chamber and special aspiration system, this tank delivers on-demand flow and unmatched performance. A thermal protection system provides overheating protection, and the durable stainless steel core means longer life. Tool-free connections allow for easy installation or replacement.

InSinkErator's Instant Hot Water Dispenser saves time and adds elegance to the kitchen. Near-boiling water at your fingertips -- perfect for making gravy, melting chocolate or quickly preparing pasta. Also double-functions to remove candle wax from holders and quickly clean dirty pots and pans.

  • F-201 Filtration System included for fresher tasting water
  • 35% more near-boiling water from larger 2/3 gallon stainless steel tank
  • Easy to adjust temperature control
  • Tool-free tank connections and dry start protection to ease installation
  • Provides 60 cups/hour of near-boiling water
  • 3-Year We Come To You In-Home Service Warranty
  • 115 volts, 750 watts, 6.25 amps
  • NSF and UL listed
  • For use with In-Sink-Erator Series 1100 and other dispenser models
  • Capacity: 2/3 gallon tank dispenses 60 cups of 200 degrees F water per hour
  • Electrical: 120 volts A.C, 750 watts, 6.25 amp heating element with grounded three (3) prong plug
  • Thermostat: Snap-action, adjustable from 160 degree F to 210 degree F (factory pre-set at 200 degree F)
  • Insulation: Meets U.L. 94HF-1 flammability specification
  • Shipping Weight: Approximately 4.2 lbs.
  • H 11"x WT 6 1/8" x D 6 3/4"
Our SKU: InSinkErator SST-FLTR

This product is listed under the following manufacturer number(s):

*Denotes a finish or option that has been discontinued

InSinkErator SST-FLTR Reviews

Rated 1 out of 5 by from Leaks In sinkerator products seem to lacking in longevity. They work fine until they break which doesent seem to long. Ive gone thru several instahot units over the years with leaky faucets and tanks that wear out and leak. Cant they get this right? there isnt alot of choices so seems you have to buy what you know what wont last. Plus leaks can be very costly and destroy cabinetry.
Date published: 2010-02-06
Rated 1 out of 5 by from Leakage problem right 3 years It's been 3years and 4 months since I purchased the product. It has leakage and ruined my kichen cabinet. The company stated that I need to pay out of pocket for the new pdt. I'm very dissapointed and I would not recommend this product.
Date published: 2012-01-03
Rated 2 out of 5 by from DISSAPOINTED Great product, very convenient especially for instant tea, hot chocolate etc. But, hugely dissapointed with manufacturing / design quality. We are on our third tank in 4 years. Seems tanks last about 2 years and then start leaking. I wish company would address this problem. Replacement tanks are quite expensive!
Date published: 2009-11-26
Rated 1 out of 5 by from knoxville disappointed Our unit lasted 3yr and 7 months. Why on earth would you make the lower drain fitting out of plastic and let is sit next to the S/S tank. It dried out and cracked. Putting a SS screw into the plastic fitting might have made the product look good but it also caused the fitting to dry out and crack.. this unit has a built in design flaw and failure rate....dont waste your money..
Date published: 2012-02-11
Rated 3 out of 5 by from Your company shipped the product really fast. The product itself I have had to replace 2 times, the first time beacuse of the fitting on top. The secaond time do to the blatter leaking. Not a great product however not alot of options out there
Date published: 2009-12-01
Rated 2 out of 5 by from Worked well for nearly 4 years Worked great for nearly 4 years; unfortunately, the warranty is only for 3 years. The tank under the sink is now leaking and will have to be replaced. Unfortunate.
Date published: 2012-05-02
Rated 5 out of 5 by from Quick Replacement Our original heater for our hot water faucet on our sink lasted beyond its warranty period. When it started leaking we panicked for having to heat water in the microwave or on the stovetop. Fortunately I found the replacement on your website, confirmed through your website and through the manufacturer that it was the right replacement. It arrived by UPS on time and installed it myself in just a few minutes. We have a happy kitchen again!
Date published: 2012-05-02
Rated 2 out of 5 by from O-ring Issue with Insinkerator Water Heater Like others, I have gone through several Insinkerator units that leak after 3 or 4 years use. I just bought a new one and then took apart the old one to see what the problem was. The leakage actually occurs where the stainless steel tank top and bottom are connected by being bolted together with about 10 small screws. There is an o-ring (roughly 8 1/2 inch circumference) sealing the join and apparently it fails at about the 3-year mark. I see no evidence of any corrosion or pin-hole leaks in the tank itself. I am going to see if I can find a suitable high-T (>250 degree F) viton o-ring to replace the failed one and perhaps get that tank back in service. This repair (if it works) is probably for the technically adept only.
Date published: 2013-02-10
  • 2015-03-19T18:56CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_cp-717064, PRD, sort_mostHelpful
  • clientName_MoreHome
6 Questions from the Community
Loading nanoRep

If I purchase this unit does it come with proper lines to hook up to the instant dispenser?

The dispenser when ordered will have the lines need for a complete installation.

Can I get the tank without the filter unit?

The InSinkErator SST-FLTR is sold with filter unit and not separately.

Please provide dimentions vertical width depth & capacity

The InSinkErator SST-FLTR is 6 1/8"w X 11"h, and the capacity is 2/3 gallons. It dispenses 60 cups of 200 degree F water per hour.

I see the question was asked already, but I would like clarification. If we already purchased SST-FLTR but the tank has developed a leak and is out of warranty, why can't we just purchase the tank without the filter kit? That is a unnecessary expense (between $60 to $100).

Insinkerator does not make these tanks available separately without the filter kits. These are the higher quality higher capacity tanks, not the smaller ones that come packaged without filter with the lower end dispenser faucets.

Can this filter work with the Hot-1 faucet?

The InSinkErator SST-FLTR is not compatible with the HOT-1.

How much energy is used when idle as when we're away from home for the weekend and temp is at 200 degrees? At 150 degrees?

The InSinkErator SST-FLTR uses 6.25 amps max, and it varies on your climate and room temperature for how often it must kick on. You can also disable it if you go away.

Buy the InSinkErator SST-FLTR at Research InSinkErator SST-FLTR online. Find InSinkErator SST-FLTR features and specifications. Get the best deal by comparing the InSinkErator SST-FLTR today.


Recently Viewed Items

DON'T MISS A DEAL! Sign Up For Email SAVINGS Privacy Policy