Haws TWBS.EW.H
|
|
$3,740.80
Originally $4,676.00, You Save 20%
|
Product Details for the Haws TWBS.EW.H
Instantaneous Heater with 2.5 GPM Flow Rate
Model TWBS.EW.H An on-demand, prepackaged, fully engineered and tested tempering system to provide tempered water instantaneously. System is designed to increase cold water temperature by as much as 45 °F (25 °C) at 2.5 gpm flow; thus it is suitable for single eyewash application. Outlet water temperature is factory set at 80 °F (26 °C).
- It is ideal for areas where supply water temperatures fall below 60 °F (15 °C) while hot water is not present.
- System consists of an 18 KW electrical instantaneous water heater, a hot shutoff valve, a bypass valve, an in-line 50-micron filter, and an outlet temperature gauge.
- Maximum inlet pressure: 125 psi. Inlet and Outlet: 1/2" IPS.
- Electrical Supply: 480/277 VAC, 3-phase, 4 wire and ground. 25 amp electrical supply. (480 VAC, 3-phase, 3 wire and ground available as special order).
0 Questions from the Community
Have a question about the Haws TWBS.EW.H? Ask it here
Haws 9201
Thermostatic mixing valve that mixes hot and cold water to supply tempered water to one or more emergency eyewash fixtures requiring flow up to 20 gpm
$925.60
Haws 9201EF
Thermostatic mixing valve that mixes hot and cold water to supply tempered water to fixtures requiring flow up to 7 gpm @ 30 psi, sufficient for a single eye-eye/face wash
$507.20
Haws 9202
Thermostatic mixing valve that mixes hot and cold water to supply tempered water to one or more emergency drench showers and eyewash fixtures requiring flow up to 40 gpm
$1,819.20
Haws 9205.REC
Recessed mounted 18-gauge stainless steel cabinet, Type 304 with a No. 4 finish, used for models 9201 and 9202. Size: 23" H x 19" W x 7" D.
$856.00
Haws 9205.SUR
Surface mounted 18-gauge stainless steel cabinet, Type 304 with a No. 4 finish, used for models 9201 and 9202. Size: 23-1/2" H x 19" W x 7" D.
$856.00
|
